Pioneer 216-D problem..... :: Pc Klinika ~ Doktori za vas kompjuter

Imam isti problem. U računaru imam 3 optike: LG combo, i pionire DVR11D i DVR215. Ovo je počelo da mi se dešava pre dva dana. Kod DVD-R oba rezača mi izbacuju "Invalid Block Address" odmah na početku rezanja, a kod CD-R sva tri (!) izbacuju "Illegal disc". Probao sam da reinstaliram Win, ne vredi. Menjao sam različite verzije Nero-a, ne vredi. Koristim Verbatim DVD-R i Verbatim CD-R, i napominjem da sam već dosta komada narezao bez problema, a onda mi se odjednom desi ovo. Testirao sam sistem raznim programima, i sve je OK. Jedino mi još ostaje da ga zapalim Smile

Baciću ovde logove, pa ako neko zna, ima gajbu piva. Dakle:
Log kod rezanja DVD-a (radim simulacije, jer neću da bacam diskove):

Kod:

Windows XP 5.1
IA32
WinAspi: File 'Wnaspi32.dll': Ver=2.0.1.68, size=160016 bytes, created 28.7.2004 16:51:12
ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.68, size=160016 bytes, created 28.7.2004 16:51:12
Nero version: 6.6.0.1
Recorder: <PIONEER DVD-RW DVR-215> Version: 1.22 - HA 0 TA 1 - 6.6.0.1
Adapter driver: <atapi> HA 0
Drive buffer : 2000kB
Bus Type : via Inquiry data (1) -> ATAPI, detected: ATAPI
Connected to MMC as unknown drive with class-nr : 1
Drive is autodetected - recorder class: Std. MMC recorder
CD-ROM: <HL-DT-ST RW/DVD GCC-4521B>Version: 1.00 - HA 3 TA 0 - 6.6.0.1
Adapter driver: <atapi> HA 3

=== Scsi-Device-Map ===
DiskPeripheral : WDC WD1600AAJS-00WAA0 atapi Port 0 ID 0 DMA: On
CdRomPeripheral : PIONEER DVD-RW DVR-215 atapi Port 0 ID 1 DMA: On
DiskPeripheral : WDC WD3200AAJS-00B4A0 atapi Port 1 ID 0 DMA: On
CdRomPeripheral : HL-DT-ST RW/DVD GCC-4521B atapi Port 3 ID 0 DMA: On
CdRomPeripheral : PIONEER DVD-RW DVR-111D atapi Port 3 ID 1 DMA: On
DiskPeripheral : ITE DiskArray 2 3.AA iteraid Port 4 ID 2 DMA: Off

=== CDRom-Device-Map ===
PIONEER DVD-RW DVR-215 H: CDRom0
HL-DT-ST RW/DVD GCC-4521 F: CDRom1
PIONEER DVD-RW DVR-111D G: CDRom2
=======================

AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 2046MB (2095532kB)
Free physical memory: 1510MB (1546508kB)
Memory in use : 26 %
Uncached PFiles: 0x0
Use Static Write Speed Table: 0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

9.1.2009
ISO compilation
10:53:05 #1 Text 0 File Isodoc.cpp, Line 6165
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : TRUE
Write : FALSE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : DAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : TRUE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE

10:53:05 #2 Text 0 File Reader.cpp, Line 127
Reader running

10:53:05 #3 Text 0 File Writer.cpp, Line 122
Writer PIONEER DVD-RW DVR-215 running

10:53:05 #4 ISO9660GEN -11 File geniso.cpp, Line 3286
First writeable address = 0 (0x00000000)

10:53:06 #5 Text 0 File Burncd.cpp, Line 3117
Turn on Disc-at-once, using DVD media

10:53:06 #6 Text 0 File DlgWaitCD.cpp, Line 256
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 279951 ( 62:12.51, 546MB)

10:53:06 #7 Text 0 File DlgWaitCD.cpp, Line 268
Write in overburning mode: NO (enabled: CD)

10:53:06 #8 Text 0 File DlgWaitCD.cpp, Line 2309
Recorder: PIONEER DVD-RW DVR-215, Media type: DVD-R
Disc Manufacturer: MCC 03 - RG20
Disc Application Code: 64, Disc Physical Code: 193

10:53:06 #9 Text 0 File DlgWaitCD.cpp, Line 430
>>> Protocol of DlgWaitCD activities: <<<
=========================================

10:53:06 #10 Text 0 File ThreadedTransferInterface.cpp, Line 844
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 279952 (279952) = #279952/62:12.52
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 279952 blocks [PIONEER DVD-RW DVR-215]
--------------------------------------------------------------

10:53:06 #11 Text 0 File ThreadedTransferInterface.cpp, Line 1047
Prepare recorder [PIONEER DVD-RW DVR-215] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 573341696, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_
0 | lead-in | 0 | 0x00 | 0x41
0 | 1 | 0 | 0x00 | 0x41
0 | 1 | 1 | 0x00 | 0x41
279952 | lead-out | 1 | 0x00 | 0x41

10:53:06 #12 Phase 24 File dlgbrnst.cpp, Line 1853
Caching of files started

10:53:07 #13 Text 0 File Burncd.cpp, Line 4003
Cache writing successful.

10:53:07 #14 Phase 25 File dlgbrnst.cpp, Line 1853
Caching of files completed

10:53:07 #15 Phase 32 File dlgbrnst.cpp, Line 1853
Simulation started at 4x (5.540 KB/s)

10:53:07 #16 Text 0 File ThreadedTransferInterface.cpp, Line 2497
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

10:53:07 #17 Text 0 File dlgbrnst.cpp, Line 1711
Set remaining time: 3:17,335 (197335ms) -> OK

10:53:07 #18 Text 0 File DVDR.cpp, Line 2027
Recording mode: Sequential Recording Mode

10:53:07 #19 Text 0 File Mmc.cpp, Line 20673
Set BUFE: Buffer underrun protection -> ON

10:53:07 #20 Text 0 File DVDR.cpp, Line 2168
Start write address at LBA 0
DVD high compatibility mode: Yes

10:53:07 #21 Text 0 File Cdrdrv.cpp, Line 8281
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 5
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 0 h
End Sector Number in Layer 0: 0 h
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 0 h
Start sector number of the next Border-In: 0 h
Media Specific [16..63]:
00 60 00 10 20 30 40 50 - 00 00 00 21 00 00 00 00 .`...0@P...!....
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................

10:53:40 #22 SCSI -1064 File Cdrdrv.cpp, Line 1432
SCSI Exec, HA 0, TA 1, LUN 0, buffer 0x08EE0000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x21
Sense Qual: 0x02
CDB Data: 0x2A 0x00 0x00 0x00 0x03 0x40 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0E
0x00 0x00 0x00 0x00 0x21 0x02

10:53:40 #23 CDR -1064 File Writer.cpp, Line 311
Invalid block address

10:53:41 #24 Text 0 File ThreadedTransfer.cpp, Line 229
all writers idle, stopping conversion

10:53:41 #25 Text 0 File ThreadedTransfer.cpp, Line 223
conversion idle, stopping reader

10:53:41 #26 Text 0 File DVDR.cpp, Line 2410
EndDAO: Last written address was 831

10:53:41 #27 Text 0 File dlgbrnst.cpp, Line 1711
Set remaining time: 0:00,000 (0ms) -> OK

10:53:41 #28 Text 0 File dlgbrnst.cpp, Line 1711
Set remaining time: 0:00,000 (0ms) -> OK

10:53:52 #29 Phase 34 File dlgbrnst.cpp, Line 1853
Simulation failed at 4x (5.540 KB/s)

Existing drivers:
File 'Drivers\CDRALW2K.SYS': Ver=8.0.0.212 , size=9464 bytes, created 8.3.2007 0:51:00
File 'Drivers\PXHELP20.SYS': Ver=3.00.56a, size=43528 bytes, created 8.3.2007 0:51:00 (Prassi/Veritas driver for win 2K)
File 'Drivers\atapi.sys': Ver=5.1.2600.5512 (xpsp.080413-2108), size=96512 bytes, created 14.4.2008 0:10:32 (Adapter driver for rec)

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

Log kod rezanja CD-R-a:

Kod:

Windows XP 5.1
IA32
WinAspi: File 'Wnaspi32.dll': Ver=2.0.1.68, size=160016 bytes, created 28.7.2004 16:51:12
ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.68, size=160016 bytes, created 28.7.2004 16:51:12
Nero version: 6.6.0.1
Recorder: <PIONEER DVD-RW DVR-215> Version: 1.22 - HA 0 TA 1 - 6.6.0.1
Adapter driver: <atapi> HA 0
Drive buffer : 2000kB
Bus Type : via Inquiry data (1) -> ATAPI, detected: ATAPI
Connected to MMC as unknown drive with class-nr : 1
Drive is autodetected - recorder class: Std. MMC recorder
CD-ROM: <HL-DT-ST RW/DVD GCC-4521B>Version: 1.00 - HA 3 TA 0 - 6.6.0.1
Adapter driver: <atapi> HA 3

=== Scsi-Device-Map ===
DiskPeripheral : WDC WD1600AAJS-00WAA0 atapi Port 0 ID 0 DMA: On
CdRomPeripheral : PIONEER DVD-RW DVR-215 atapi Port 0 ID 1 DMA: On
DiskPeripheral : WDC WD3200AAJS-00B4A0 atapi Port 1 ID 0 DMA: On
CdRomPeripheral : HL-DT-ST RW/DVD GCC-4521B atapi Port 3 ID 0 DMA: On
CdRomPeripheral : PIONEER DVD-RW DVR-111D atapi Port 3 ID 1 DMA: On
DiskPeripheral : ITE DiskArray 2 3.AA iteraid Port 4 ID 2 DMA: Off

=== CDRom-Device-Map ===
PIONEER DVD-RW DVR-215 H: CDRom0
HL-DT-ST RW/DVD GCC-4521 F: CDRom1
PIONEER DVD-RW DVR-111D G: CDRom2
=======================

AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 2046MB (2095532kB)
Free physical memory: 1514MB (1550560kB)
Memory in use : 26 %
Uncached PFiles: 0x0
Use Static Write Speed Table: 0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

9.1.2009
CD-ROM (ISO)
11:09:32 #1 Text 0 File Isodoc.cpp, Line 6165
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : TRUE
Write : FALSE
Finalize CD : FALSE
Multisession : FALSE
Burning mode : DAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : TRUE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE

11:09:32 #2 Text 0 File Burncd.cpp, Line 2832
PIONEER DVD-RW DVR-215
Buffer underrun protection activated

11:09:32 #3 Text 0 File Reader.cpp, Line 127
Reader running

11:09:32 #4 Text 0 File Writer.cpp, Line 122
Writer PIONEER DVD-RW DVR-215 running

11:09:32 #5 ISO9660GEN -11 File geniso.cpp, Line 3286
First writeable address = 0 (0x00000000)

11:09:32 #6 Text 0 File Burncd.cpp, Line 3117
Turn on Disc-at-once, using CD-R/RW media

11:10:04 #7 Text 0 File DlgWaitCD.cpp, Line 256
Last possible write address on media: 359846 ( 79:59.71)
Last address to be written: 279951 ( 62:14.51)

11:10:04 #8 Text 0 File DlgWaitCD.cpp, Line 268
Write in overburning mode: NO (enabled: CD)

11:10:04 #9 Text 0 File DlgWaitCD.cpp, Line 2309
Recorder: PIONEER DVD-RW DVR-215;
CDR code: 00 97 24 01; OSJ entry from: Taiyo Yuden Company Limited
ATIP Data:
Special Info [hex] 1: C0 00 98, 2: 61 18 01 (LI 97:24.01), 3: 4F 3B 48 (LO 79:59.72)
Additional Info [hex] 1: FF FF FF (invalid), 2: FF FF FF (invalid), 3: FF FF FF (invalid)

11:10:04 #10 Text 0 File DlgWaitCD.cpp, Line 430
>>> Protocol of DlgWaitCD activities: <<<
=========================================
Insert empty disc for simulation.
(Medium in drive: Unknown. Medium required by compilation: CD-R/RW.)

11:10:04 #11 Text 0 File ThreadedTransferInterface.cpp, Line 844
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 279952 (279952) = #279952/62:12.52
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 279952 blocks [PIONEER DVD-RW DVR-215]
--------------------------------------------------------------

11:10:04 #12 Text 0 File ThreadedTransferInterface.cpp, Line 1047
Prepare recorder [PIONEER DVD-RW DVR-215] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc not fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 307200 573648896, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_
-150 | lead-in | 0 | 0x00 | 0x41
-150 | 1 | 0 | 0x00 | 0x41
0 | 1 | 1 | 0x00 | 0x41
279952 | lead-out | 1 | 0x00 | 0x41

11:10:04 #13 Phase 24 File dlgbrnst.cpp, Line 1853
Caching of files started

11:10:04 #14 Text 0 File Burncd.cpp, Line 4003
Cache writing successful.

11:10:04 #15 Phase 25 File dlgbrnst.cpp, Line 1853
Caching of files completed

11:10:04 #16 Phase 32 File dlgbrnst.cpp, Line 1853
Simulation started at 16x (2.400 KB/s)

11:10:04 #17 Text 0 File ThreadedTransferInterface.cpp, Line 2497
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

11:10:04 #18 Text 0 File Mmc.cpp, Line 16025
StartDAO : CD-Text - Off

11:10:04 #19 Text 0 File Mmc.cpp, Line 20673
Set BUFE: Buffer underrun protection -> ON

11:10:04 #20 Text 0 File Mmc.cpp, Line 16312
CueData, Len=32
41 00 00 14 00 00 00 00
41 01 00 10 00 00 00 00
41 01 01 10 00 00 02 00
41 aa 01 14 00 3e 0e 34

11:10:38 #21 SCSI -1046 File Cdrdrv.cpp, Line 1432
SCSI Exec, HA 0, TA 1, LUN 0, buffer 0x03420000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x30
Sense Qual: 0x05
CDB Data: 0x2A 0x00 0x00 0x00 0x01 0xE0 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0E
0x00 0x00 0x00 0x00 0x30 0x05

11:10:38 #22 CDR -1046 File Writer.cpp, Line 311
Illegal disc

11:10:38 #23 Text 0 File ThreadedTransfer.cpp, Line 229
all writers idle, stopping conversion

11:10:38 #24 Text 0 File ThreadedTransfer.cpp, Line 223
conversion idle, stopping reader

11:10:38 #25 Text 0 File dlgbrnst.cpp, Line 1711
Set remaining time: 0:00,000 (0ms) -> OK

11:10:38 #26 Phase 34 File dlgbrnst.cpp, Line 1853
Simulation failed at 16x (2.400 KB/s)

Existing drivers:
File 'Drivers\CDRALW2K.SYS': Ver=8.0.0.212 , size=9464 bytes, created 8.3.2007 0:51:00
File 'Drivers\PXHELP20.SYS': Ver=3.00.56a, size=43528 bytes, created 8.3.2007 0:51:00 (Prassi/Veritas driver for win 2K)
File 'Drivers\atapi.sys': Ver=5.1.2600.5512 (xpsp.080413-2108), size=96512 bytes, created 14.4.2008 0:10:32 (Adapter driver for rec)

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

Sad sam probao da narežem nešto na neki Emtec DVD+RW, i to radi, a ovi normalni diskovi i dalje neće. Užas.