jel itko stavio ovu najnoviju verziju softwera za N70(5.0638.3.0.1),dajte detalja jel bolja od prosle verzije da je i ja sebi instaliram?

Pazite šta je sve novo u zadnjoj verziji Phoenix_service_sw_2006_34_2_156:

http://rapidshare.de/files/35244159/phoenix_service_sw_2006_34_2_156.exe

CONFIDENTIAL 1 (3)
x Level 1 x Level 2 x Level 3 x Level 4 Version 1
COMMON SW SB-078 Copyright © Nokia Corporation 2006
Customer and Market Operations Service Bulletin No. SB-078/02.10.06
EMEA Customer Care
COMMON SW
MULTI PROTOCOL PHOENIX SERVICE SOFTWARE VERSION 2006.34.2.156
Version history:
Version 1 02.10.06 Initial version
Multi protocol (including support for CDMA, GSM, TDMA and WCDMA)
Phoenix Service Software version 2006.34.2.156 has been released.
If you have Phoenix version 2004.24.7.55 or older you must uninstall it
before installing this release.
This Phoenix Service Software installation package includes following SW
components:
- Phoenix Service Software 2006.34.2.156
- DK2 Dongle Driver v 6.21.0.169
- Connectivity Cable Driver 6.80.5.1
- FLS-4S Dongle Driver v 2.09
- Flash Update files for FLS-4S, FPS-8* and FPS-10 v 06.35.0.36
- Software package for FPS-10 v 1.20.0
- Software package for FPS-11 v 1.00.012.1
- Faultlog and Archive & Send programs for repair data reporting
Recommended PC HW requirements:
- Computer Processor: Pentium 700 MHz or higher
- RAM 256 MB
- Needed disk space 100-200 MB
Supported Operating Systems:
- Windows 2000 Service Pack 3 or higher
- Windows XP Service Pack 1 or higher
During installation a Dongle must be attached to the parallel port of your
computer and when installing Phoenix into Win2000 or XP you must have
admin rights locally.
For using the Phoenix in Win2000 or XP, user must have power user rights.
After installing Phoenix Service Software version 2006.34.2.156, please
install latest product specific data package or SW bundles; do not use
old data packages or SW bundles.
CONFIDENTIAL 2 (3)
x Level 1 x Level 2 x Level 3 x Level 4 Version 1
COMMON SW SB-078 Copyright © Nokia Corporation 2006
Supported phone models:
The list of supported models is available once Phoenix is installed by
navigating to the Open Product under the File menu.
Changes/improvements made to from v 2006.20.14.153 to v 2006.34.2.156:
For CDMA:
- Support for 2365i/2366i/2367i (RM-155) added.
- The preferred connection to FPS-10 is using the LAN port.
- The preferred connection to FLS-4s is using the USB port.
- Intermittent crashing when flashing CDMA phones with FPS-10 fixed with
new PRI server.
Known limitations/errors:
- FPS-11 has limited success with this Phoenix version. The following
models are known to exhibit failures when flashing: 2355, 2255, 6265i
- Phoenix does not restore the Theme/Background for 3155I & 3155 & 3152
& 6155 & 6155i & 6152 after Easy Flash
- Phone book is not getting saved for 2366i, when using EZ flash with FLS-
4S
Changes/improvements made to from v 2006.20.14.153 to v 2006.34.2.156:
For GSM / WCDMA:
- Problem with tuning of ambient light sensor is fixed.
- T-Mobile, 6133 able to flash variants with MyFaves
- Rebuilding IMEI/ESN, Simlock requires Smart card, SX-4 with rebuild
access rights enabled. Please send your SX-4's serial number to your
regional security officer if you need these rights.
- Rebuilding ESN/IMEI with FPS-8 now requires and SX-4 card to be used.
An external smart card reader is needed.
- Auto Tuning requires a user registered and activated SX-4 card.
- WLAN auto tuning menu added for Nokia N93/RM-153
- Variant swap procedure is corrected.
CONFIDENTIAL 3 (3)
x Level 1 x Level 2 x Level 3 x Level 4 Version 1
COMMON SW SB-078 Copyright © Nokia Corporation 2006
Needed equipment for software update:
- Phoenix Service Software version 2006.34.2.156 (or later), which includes
all needed drivers and flash support files
- Latest phone model specific Product Data Package or Flash Bundle
- Flash Update package for FPS-10/FPS-8/FLS-4/FLS-5 (v 6.35.036
included in Phoenix package)
- JBV-1 Software Update v 18 or later (not valid for JBV-1 RoHS compliant)
- Parallel Port Driver for FPS-8, if you experience slow file transfer speed via
LPT port
- PK-1 or PKD-1 Dongle or
- FLS-4S or FLS-5 POS Flash Dongle
- Programming devices for updating the phone software
- Product specific service devices
Note:
- A complete Phoenix service SW installation package will always
include the latest available drivers and flash update files
- Please use separate driver of flash support file installation packages
only, if updates occur between complete Phoenix releases
How to install new Phoenix 2006.34.2.156
1. Download phoenix_service_sw_2006_34_2_156.exe – application file
from NOL to your computer (e.g. C:\TEMP)
2. Close all other programs
3. Run phoenix_service_sw_2006_34_2_156.exe and follow instructions on
the screen to install Phoenix Service Software.
4. Connect a dongle (PK-1, PKD-1, FLS-4S, FLS-5) when message appears
on the screen
5. If you are prompted to update any existing driver or file versions, select
“yes”
6. Depending on the operating system PC may require rebooting
7. Allow Windows to register Phoenix components
8. Open Phoenix and update your prommer with the latest software included
in this installation package
8. Use the latest available product specific data packages or flash bundles
with new multi protocol Phoenix.

Zar ne pročitaste da ovaj zadnji firmver ne dozvoljava više restartovanje telefona iz nekih dodatnih aplikacija kao što su AppMan i sl.?!? Možda ima još nekih restrikcija?!? Nemojte se odmah zaletati.
Ne znači da je dobar firmver ako je zadnji tj., nikada to i nije bilo pravilo kod mobilnih telefona. Koristite firmver koji vam najbrže i najbolje radi na telefonu a ne uvek poslednji!

ije mi jasno sta ovo ima vezi sa sovtver telefona sta si naveo sta ima u programu ,,ako hoces  mi malo objasniti

slazem sa tobom da koje naj brzi i naj bolji ali neli su usovrsili inace zasto da ga postavljaju ili nazivaju kao novi