Fabrički reparirani telefoni iPhone po ceni od 99 dolara


Ukoliko ste pomislili da iPhone ne može biti jeftiniji, pripremite se na još jedno iznenađenje u režiji kompanije AT&T-a. Ranije ovog meseca, AT&T je ponudio fabrički prerađene modele po ceni za 50 dolara nižoj od prodajne.

Na opšte čuđenje, posle samo nedelju dana od početka prodaje cena je ponovo smanjena za 50 dolara (prethodna je iznosila 150 dolara), pa sada iznosi svega 99 dolara za reparirani model sa 8GB ugrađene memorije i dvogodišnjim ugovorom. Naravno, ovo nije stalna cena, već specijalna novogodišnja ponuda pa potencijalni kupci imaju malo vremena da je iskoriste.

Ovo predstavlja idealnu priliku da Appleov proizvod zaposedne domove i ustoliči se kao najprodavaniji telefon, a ukoliko se pitate kako se ovakva ponuda isplati kompaniji AT&T, treba proučiti dvogodišnji ugovor o mesečnom održavanju usluge.

Izvor

Jesu li pustili otkljucavanje?

Pustili su otkljucavanje!
Informacije na zvanicnom sajtu http://blog.iphone-dev.org/

Update 1: yellowsn0w isn’t released yet. Don’t  wastekeypresses and valuable drinking time searching repos or the web for it ;-) as soon as it is released we’ll announce the details here :-)

NE RADI jos uvek unlock ni sa 0.91 verzojom !

Don't eat yellowsn0w!

Hello all,

We wish you a very happy, healthy, and hopeful 2009!

We have released the yellowsn0w 3G unlock application, and we have some information that you may find useful:

BASICS
The unlock about to be released works exclusively with baseband 02.28.00. This baseband is provided by the latest firmware update (2.2) from Apple.  You’ll need to upgrade to this release using iTunes and then use QuickPwn to activate etc. There are plenty of tutorials about this on iclarified, bigboss, and other established tutorial sites.  Because it works on 02.28.00, it is available to everyone on the planet.  This means we don’t need to unnecessarily expose holes in earlier basebands, which is an important concern.
The application is a small daemon that is launched on boot.  It injects the payload at boot and also whenever there is a baseband reset.  You won’t notice anything about it other than that your third-party sim now works.  It’s a small program and unobtrusive.  There is no GUI (this is by design).
You can add the application using the sources outlined below (coming soon). There are Cydia and Installer sources available, so use whichever you are comfortable using.
yellowsn0w is completely removable through Cydia, the command line, and iTunes.

DETAILS
There is a known issue with SIM cards that have STK (SIM Toolkit) application menus.  These menus are usually items such as “top up” “get credit” “lotto numbers” etc. These menu items confuse the application sometimes.  Removing and reinserting the SIM once after reboot (give it about 10 secs 60 seconds (with v0.9.1) after you see the slide to unlock widget) fixes this issue.  We’re working on a better fix.
For those of you using SIM cards without STK menus, the application has some optional arguments that will make the unlock much faster for you.  So either experiment on your own (use “yellowsn0w -h” for usage) or wait for a customization writeup.
After you install yellowsn0w via Cydia, you should return to the Cydia main menu then reboot your iPhone with the 3rd party SIM installed.  Wait for the slide to unlock screen, then wait 10 or 15 secs more.   If you don’t see your carrier name pop up, then remove your SIM, reinsert it, and wait 10 secs more.  This is the step we’ll be working on eliminating next.

RANDOM
The application is version 0.9 0.9.1.  This is considered beta software, you use it at your own risk. You know the score.
The application is released on a non-commerical basis.  Please do not accept pirates and scummy ripoffs of this software. We license this software for single use and in a non-commerical environment (meaning you can’t charge for it). The techniques and methods used are not to be used by third party companies. We are watching you Jody…we won’t be so forgiving this time.
Direct linking to the repository URLs is prohibited, please only link to this post. We will be checking referers.
Happy 2009 and enjoy!

The iPhone 3G is used all over the world with all sorts of SIM cards, and we almost certainly will see untested and unexpected situations.  If the soft unlock doesn’t work for you on day 1 (literally day 1, of 2009!) then please don’t panic or be impatient.  This is new territory for everyone, so enjoy the ride as much as you can

RELEASE INFO
Cydia source: http://apt9.yellowsn0w.com/
Installer repo: http://i.yellowsn0w.com/

UPDATES
1.  Soon you’ll see yellowsn0w 0.9.1 in the repos.  It uses a much longer delay to let your SIM card initialize.  If you have problems with 0.9.0, try this one and wait a full minute after you seem homescreen, then reinsert sim card.  We need both success and failure reports to tune this across the world, so please be patient (but please also report result!)
2.  If you are in the U.S. and are trying this with T-Mobile, you must turn off the 3G switch in Settings.  Also if you are good with the command line, you can make it much easier by adding the line <string>-q</string> right after the /usr/bin/yellowsn0w line in /System/Library/LaunchDaemons/org.iphone-dev.yellowsn0w.plist  (that’s and advanced tip, hopefully someone will make a boosprefs type of tool for it)

Mysterious pink iPhone 3G hits eBay, cue onslaught of rumors



Say wha'?! An iPhone in a hue other than black, white, or silver? While a red model has been rumored since before the 3G even launched, we've never thought about a pink one -- let alone one hitting eBay. The text on the back of the device convinces us that this isn't a simple ColorWare job, but there aren't any photos of the back of the packaging either. Our take? Some OEM in Asia whipping up custom colors. But hey, Macworld's just under a week away, so who knows?

izvor

Koliko se secam ovo sam ja imao jos 2007 na Iphonu !!!

Izasao je Yellowsn0w! Prvo softversko resenje za otkljucavanje iPhone 3G.

Trenutno je i dalje u fazi dorade i poboljshavanja - aktuelna verzija 0.9.4.

Yellowsn0w radi iskljucivo sa 2.28 verzijom modem firmware-a (pogledajte u settings/general/about).

PREPORUKA:

- ko ima ranije verzije modem firmware-a od 2.28 (settings/general/about) i radi mu iPhone sa UniversalSIM-om - SAVETUJEMO DA JOSH NE RADITE UPDATE TJ. TRENUTNO CE VAM UNIVERSALSIM RADITI BOLJE (imacete manje problema)

- ukoliko imate 2.28 verziju basebanda, slobodno probajte Yellowsn0w! Trenutno su iskustva podeljena (nekome radi, nekome ne).

UPUTSTVO ZA YELLOWSN0W 0.9.4:
- potrebno je da imate iPhone 3G na 2.2 verziji tj. modem firware 2.28!
- potrebno je da vam iPhone nije aktiviran preko iTunesa
- potrebno je da je iPhone jailbreakovan (pwn)
- yellowsn0w instalirate preko Cydia-e ili Insaller-a, sourcevi su:

Cydia source: http://apt9.yellowsn0w.com/
Installer repo: http://i.yellowsn0w.com/

- ubacite sim karticu koju cete koristiti (ne sme da ima aktiviran PIN - deaktivirajte ga!)
- restartujte iPhone nakon instalacije
- kada se iPhone ponovo ukljuci, sacekajte 30-60sec
- ukoliko niste dobili signal idite u settings, ukljucite airplane mode (ON), sacekajte 10 sekundi (bitno!), iskljucite airplane mode (OFF) -> verovatno cete dobiti signal

ali ovo je ibeer magic