Tako je! NFS je neprikosnoven!

Drago mi je da si probao i Xtrakt i da radi 
Ako usporava, sve pobij iz "task managera" ili nabaci brzi rom 

Mora malko usporavati jer to ipak nije "native g-sensor" vec se radi posredno preko G-pada.
Nego bas me interesuje na sta ce da lici ovaj Age of Empires sa g-sensorom  Volio bih da mogu upravljati onim camcem za ribu preko njega 

Meni ovaj pocket nester zvuci obecavajuce. Isprobacu ga cim ugrabim vremena 

GRemote pro je izasao u jos jednom izdanju. Ma sta vam god lagali da jeste native bluetooth support, sve pada u vodu ako nije dobro podesena Bluetooth PAN konekcija... Doduse setovanje jeste olaksano, ali PAN jednostavno mora da radi.

Ja sam se napatio sa ovim iako na ovom tutorijalu izgleda jednostavno 
Ko zeli da isprobava, preporuka najnoviji BlueSoleil softver (6.4 se moze naci), pogledati da li radi Bluetooth PAN, ugasiti firewall za pocetak i raditi postupke sa ovoga klipa. Softver automatski kazuje da li je bluetooth servis aktivan, ali nece da se konektuje (kaze connection timeout) ako PAN ne valja.

Koraci su sledeci: 

Flute Concert Music application turns your smartphone into an instrument 

Ko je jos cuo za flautu G sensor enabled 
HyongaSoft has developed a Windows Mobile application which turns your smartphone into a virtual flute.

The sound is controlled by blowing into your device’s microphone.     
The application supports 3 octaves, with octave controlled by tilting the phone.

It features:

- User friendly piano style key
- VIBRATE feedback when octave changes
- Fast response and Realistic flute sound. 
- Changeable volume.
- High quality user interface
- Auto-blow mode (for the lazy  )   
- 4-Type skin mode
- You can change octave by finger gesture in octave-circle (for none accelerometer devices)
- Support multi-track record and play! 
- Support file save and load! 

E sta li sve nece smisliti ovi ljudi  Evo jos jedne originalne aplikacije za dzabaka

EpDetect: Freeware automatic emergency alarm for epileptics

Epdetect is an accelerometer based mobile phone application that uses advanced signal processing to detect epileptic seizures. It runs on most mobile phones that support SMS messaging, movement detection and GPS position location.

The addition of the seizure detection signal processing enables the phone to function as a wearable seizure detection system, with remote signalling to carers. Epdetect monitors the wearers movements, distinguishing between normal movement and movement associated with a Tonic–clonic seizure. If a seizure is detected, Epdetect will contact your carer with your status and GPS position.

Detector Active Screen:
Status Message – A “Seizure Detected – press the clear button for 5 seconds to cancel” message will be displayed.
Audible Alarm – An audible alarm will sound immediately upon detection of a seizure.
Count Down Timer – A countdown from 30 seconds will be displayed to enable the user to press the cancel button prior to sending the outgoing SMS alert. The countdown timer is adjustable from 1- 60 seconds.
Clear Button – A large ‘clear’ button graphic is displayed to allow the user to clear the detector active status, which also cancels any outgoing SMS alert. The ‘clear’ button must be pressed for 5 seconds within 30 seconds to prevent the outgoing SMS message.

Alarm Active Screen:
Status Message – A “Seizure In Progress – press the cancel button for 5 seconds to signal the end of a seizure” message is displayed.
Audible Alarm – A second audible alarm will continue to play until the alarm active status is cleared.
Cancel Button – A large ‘cancel’ button graphic is displayed to allow the user to clear the alarm status, which also causes an end of seizure SMS message to be sent. The ‘cancel’ button must be pressed for 5 seconds to cancel the alarm active status.
Additional Message – A message saying “This person may be having an epileptic fit” will be displayed on screen.

Advanced Options Screen:
Back-Up Accelerometer Data – Tick box, which if ticked saves the raw accelerometer data that caused the last alarm condition to a file.
GPS On/Off – Tick box, which if ticked activates the phone’s GPS to generate location information, which is appended to SMS messages.
Carer No 1 – The mobile phone number of the first carer, this number will receive an SMS message if an alarm condition is active.
Carer No 2 – Optional, the mobile phone number of the second carer, this number will receive an SMS message if an alarm condition is active.
Carer No 3 – Optional, the mobile phone number of the third carer, this number will receive an SMS message if an alarm condition is active.
Alarm Message – The SMS message that will be sent when an alarm is active.
Cancel Alarm Message – The SMS message that will be sent when an alarm is cleared.
Detector Active Sound – Selects the warning sound to play when the detector is active.
Alarm Active Sound – Selects the sound to play when the alarm has not been cancelled (could be an audio file such as; “Help this person is having an epileptic seizure”).

Da malo osvezimo temu. 
Motion Drum using accelerometer in your smartphone.
//upravo je skidam 

====== KEY FEATURES
- Compatible with Windows mobile 5.0 or higher
- 5-types Drumset (rock, pop, jazz, techno, hiphop)
- High quality user interface
- Center ball moves by phone angle.
- Can play Two sounds at once by Tilt and Touch screen 
- Hit and VIBRATE feedback
- Fast response and realistic drum sound. 
- Changeable volume.
- Support multi-track record and play! 
- Support file save and load! 
**External speaker or earphone recommended for powerful BASS SOUND. 

====== SUPPORT RESOLUTION
- WVGA, WQVGA, VGA, QVGA
  (Does not support square type  )

====== REQUIREMENTS
- Windows mobile 5.0 or higher device.
- .net Framework 2.0 or higher
  (WM 6.1 need not to install framework)
- free memory more than 8MB
- Storage space more than 8MB

======SUPPORTING LANGUAGE
- English

Malo su zakazali developeri sa razvojem G-sensor aplikacija
Da malo osvezimo temu.

"Gapple" is a small and funny time-killer game. It was developed for HTC Touch Pro and HTC Diamond.

(radi i na HD-u, ali ne u fullscreenu-u...)

Objectives are simple: manipulate your device to move blue pointer and hit positive bubbles to get points and play as long as you can! 

Skiers App 1.0 – measure speed, distance & g-force while skiing with WM 

Za raju koja voli skijanje da vidite da li napredujete   

Skiers App is your downhill skiing companion. It displays skiing statistics for you while skiing. Data such as max speed, height difference, distance and max G-force is displayed. Bring Skiers App to the hills and start checking your ski data.


Features:

- Maximum G-force
- Speed / maximum speed
- Height / height difference
- Running time
- Distance

Dok sredjujemo backarelli-ju komp da ja predstavim koju aplikaciju 

FPSEce Playstation emulator for Windows Mobile reaches version 1.0 – now with full touch screen support & G sensor

A new version of the Windows Mobile Playstation emulator, FPSEce, has been released. With the last version being 0.96, I suspect the developer made a small mistake when he named it version 0.10, but that seems to be about the only bug in this great release.

The new version features:

• Completely rewritten core and interface!
• Faster!
• Supports many new games
• Supports g-sensor on Toshiba TG01, more to come
• Touch screen analogue stick emulation
• New on-screen multi-touch button-assignment
• Supports some Bluetooth-gamepads (i.e. BGP 100)
• And more…

The software is  freeware, but the developer has released a special version to cover his costs, which includes the ability to save the state of the game at any point, which will be useful for popping into and out of a game. That version costs $5.


Kako izgleda sa g - sensorom. Pogledati klip

Shake to Send comes to Windows Mobile 

Some devices, like the iPhone, have pretty deficient Bluetooth stacks, and have had to come up with pretty creative ways to share files.  One app which allowed this is called Bump, which paired devices which were shaken at the same time.

Jaxbot over at XDA-Dev has implemented the idea as seen on this video.  The software uses the G-sensor to detect the shakes, but can also be used manually on devices without, and uses a data connection for the pairing and sharing process.  Jaxbot intends to implement photo sharing also, and to improve the already nice looking UI.

Shake to wake   
--> an application which allows you to wake your HTC HD2 from suspend simply by shaking it.

The software stays active even when the smartphone is suspended, and also keeps the G-sensor awake  .  The effect on battery life is not known yet  , but if you decide to try it out, let us know in the comments below. 

The software by zzattack can be downloaded from this XDA-Dev thread