Po meni, jedan od programa koje treba izbegavati maksimalno. Poslednji put sam istina probao da ga koristim davno, ali posto je tada bio krs, ne verujem da se nesto posebno promenilo. U odnosu na SKTools (to su programi slicnog profila) a na skali od 1 do 10, dao bih mu ocenu 2, dok SKTools zasluzuje 10+ jer mislim da je taj program prakticno svemoguc.

E sad malo vise o performansama:

Pocket Mechanic je odlican za pravljenje problema jer cesto vidi problem tamo gde ga nema, pa pokusavajuci da sredi nepostojeci problem, napravi veeeliki problem.

Ovo nikako nije radilo - premesti on meni aplikacije na memo karticu, ali aplikacije po pravilu vise ne rade jer ih je lose premestio. Zato SKTools ovo odradjuje savrseno.

Nemojte se varati da ovo pokusavate jer postoji realna mogucnost da ce aparat posandrcati ili cete cak morati da formatirate telefon. Upravo to se meni desilo, a u tom trenutku nisam cak imao ni full backup na PCu, tako da sam poludeo. Btw., zahvaljucuci ovoj aplikaciji poceo sam redovno da pravim backup.

Itd. Mrzi me da nabrajam, ali bila je to jedna zaista nesrecna aplikacija... 

-way,ja imam drugacija iskustva.....   
   Probaj poslednju (ili pred) verziju....

Verujem da su ga unapredili u odnosu na pre nekih godinu dana, ali posto imam traume od ranije , ne bih da probavam. Iskreno, za mene je SKTools mozda i najmocniji program  koji sam ikada imao prilike da koristim (racunam sve mobilne platforme) tako da ne bih da ga menjam.

-e pa , 14tog decembra je puštena nova verzija SKTools-a 4.4.7.15.....

                                             [b]SKTools Best maintenance toolkit[/b]


   updated to version 4.4.7.15 (Monday, 14-Dec-2009 22:33:59 MSK) 
       WM5 Pocket PC (Phone Edition), WM6 WM6.1 WM6.5 Classic and Professional compatible

                              

Info:
http://s-k-tools.com/index.html?m_products.html
           
          

Access Netfront Browser 4.0 now available for download

nueUSBKeyboard - fenomenalna alatka koja pretvara Touch Pro (i jos neke aparate) u USB HID tastaturu. Nije potreban PC klijent - samo se instalira .exe na telefonu, prikljuci se preko USBa na PC, i to je to. Posle nekoliko sekundi sam vec lepo mogao da koristim moju novu tastaturu. Trebalo bi da moze da se koristi i na PS, XBOX itd. Btw., pored hardverske, moze se koristiti i virtuelna tastatura, uz odredjena podesavanja (http://www.nuerom.com/BlogEngine/post/2009/04/03/nueUSBKeyboard-11.aspx), a u okviru programa nalaze se dodatne onscreen naredbe kojih nema na hard tastaturi TPa (function keys, Windows taster i sl.).


Here’s an interesting bit of software. No2Chem was looking for a mini-keyboard when he realized he already had a perfectly serviceable keyboard on his HTC Touch Pro.

A few hours of work later and we have nueUSBKeyboard, which implements a HID Keyboard as a USB Client Function. Additional keys like Control, Alt and so forth are also implemented as on-screen keys. This software will be particularly useful for engineers who administer headless servers for example.

Description
nueUSBKeyboard turns your device into a real USB HID Keyboard, allowing you to use your device’s keyboard (or soft keyboard) to enter text, control the BIOS, etc on your computer, or other USB Host that accepts HID Keyboards (i.e. Playstation3, XBOX360, etc.).


Currently, it’s only been tested on the CDMA Touch PRO, but I’m pretty confident it should work with most devices that implement a standard Windows CE 5+ USB client function driver. Also, be aware the LED reports and some keys don’t work properly yet.

Please uninstall version 1.0 before installing the latest version. Version 1.0 was accidentally named “nueKBLight”.

Version History
1.0 First Release
1.1 Support SIP, Support layout files, Fix modifier keys

Note: The exe file in the archive is intended to be run on your phone/device. Copy the exe to your phone/device and run it from there.

Besplatno preuzimanje

CradleAlarm 4.6.3

CradleAlarm supersedes the poorly featured alarm clock of Windows Mobile. With this application you can set multiple alarms, that provide a large number of settings to let you start your day as pleasant as possible, to remind you of an appointment or many more.

Four alarm types
Four different alarm types are available:

    * The Compact alarm provides only the most important settings for adding an alarm quickly.
    * With the Wizard alarm all settings are queried with a convenient step-by-step wizard.
    * For an Appointment alarm a specific date is additionally assigned to the alarm time.
    * A Command alarm executes a specified application or opens a document at the alarm time.

The alarms can be scheduled as one-time alarms or periodical alarms at given weekdays.

Sound file formats
Awake with your favorite music, calm forest sounds or your preferred ring tone.
Assign a playlist or just a single sound file to every alarm. Supported are all file formats that the Windows Media Player is able to play, like MP3, WAV, WMA, etc...

Customizable alarm screen
The alarm screen of every alarm is customizable to your taste.
Select your favorite picture as background image, enter a greeting text and set your desired layout for the alarm.

Get up on time
Thanks to the innovative snooze function of CradleAlarm you will never rise late again. You can active the quiz feature, by which you will have to solve a task before you can activate the snooze mode again. By solving a math calculation, unraveling a memory field or repeating a sequence of numbers your brain is activated even more with every level and thusly initiates the wake-up process.

Volume settings
Decide for yourself if the alarm should start at a specified volume or the volume set in your device at the alarm time. Furthermore thought was been given to add a flexible fade-in feature, that plays even loud starting sound files without being shocked at the alarm start.

Alarm templates
Your alarm settings can be saved as templates giving you the opportunity to add similar alarms with just a few clicks.

Ready to go
Five alarm templates are already added to your application. These include background images and sound files. That way you can start adding great alarms immediately after the installation without having to transfer pictures or sound files to your device.

Color customization
The entire application can be customized with your favorite color giving it your personal touch.

Windows Mobile 5.x and 6.x
The application runs on every Windows Mobile Professional device (with touchscreen and Windows Mobile 5.0 and up) and supports all existing screen resolutions and alignments like portrait, landscape or quadratic displays.

Certified by Microsoft
The application is available at the Windows Mobile Marketplace and therefore certified by Microsoft through multiple tests. That way a good stability and Windows Mobile compatibility is guaranteed.

Kupite ovde.

PocketRTAUltra 1.01


Pocket RTA Ultra is a highly portable real-time spectrum analyser for your PC and Pocket PC and is the latest addition to our range of award winning RTA software packages, expanding on Pocket RTA Pro and adding support for the latest high resolution Pocket PC devices.

PocketRTA Ultra has many advanced features which are normally only found in much more expensive sound analysis software, providing fast and accurate spectrum analysis suitable for both amateur hi-fi enthusiasts and professional A/V engineers. Uses include system calibration, monitoring of noise levels and testing of audio equipment.

PocketRTA Ultra samples sounds picked up by the built-in microphone on the Pocket PC or the input of your PC's sound card and then applies a Fourier Transform to the samples to obtain a frequency spectrum. The result is an accurate representation of the sampled sound broken down into its frequency components.

PocketRTA Ultra gives total control over input sample rate and FFT length, so you can tailor the display to your needs. Sample rates up to 44Khz allow frequencies of up to 22Khz to be measured. Various display modes include, linear narrow band, logarithmic narrow band, Octave, 1/3 Octave, 1/6 Octave, Sample, SPL and Spectrogram displays with ANSI A and C weighting curves. PocketRTA Ultra allows real-time magnification (up to 250 times) of a selected frequency range. The touch screen allows selection of the nearest FFT point giving a display of it's frequency and decibel level. Up to 64 times averaging and variable decay settings allow more stable readings for fluctuating or unstable input signals whilst our unique noise cancellation system allows you to remove unwanted background noise.

New Features of the Ultra Edition

PocketRTA Ultra is specifically written to take advantage of the higher resolutions on WM5 and WM6 devices. Boasting a much improved interface and plenty of new features make this a must have for new and existing RTA users.

It is now possible to run the program in either portrait, landscape or even interted modes.

Another new feature is the capture bar, allowing you to capture and overlay up to 3 additional traces over the real time display. These traces can be saved to file, exported for future reference or used in compare mode against live inputs.

New features include a mode for capturing LEQ (equivalent continuous sound levels), and the ability to capture and analyse sounds frame by frame with the new Impulse mode.

Another new feature is the ability to calculate RT60 reverberation times.

Save and Load calibration and FFT settings as profiles.

New Auto Calibration feature.

Comes complete with a PC version of the software, which can display at bigger screen sizes than the Pocket PC version will allow.


System Requirements

There are two versions of PocketRTA in this package, one that can be installed on your Pocket PC (206Mhz ARM / 400Mhz XScale processor) and the other will run on any PC running Windows 95/98/ME or XP.

    * 44Khz sampling allowing signals up to 22Khz to be measured.
    * Definable FFT size and sample frequency (256bytes-8KHz).
    * Single channel spectrograph
    * Standard ANSI/IEC A and C weighting curves.
    * Automatic noise cancellation.
    * Automatic peak note / frequency and octave display.
    * Narrow band Linear and Logarithmic scalable displays.
    * Octave, 1/3 octave and 1/6 octave displays.
    * SPL (Sound Pressure Level) display.
    * LEQ (Equivalent continuous sound levels).
    * 500x zoom for accurate analysis of narrow band data.
    * Internal Signal Generator
    * Touch screen plotting of nearest point with frequency and decibel readout.
    * Up to 64x averaging and smoothing to help stabilize the display.
    * Peak trace facility for better reading of fluctuating frequencies.
    * Selectable signal decay speeds.
    * Selectable signal gain control.
    * Pause facility freezes the live trace to aid analysis of data.
    * 1/3 Octave Calibration of microphone.
    * Calibration Profiles.
    * Auto Calibrate Feature.
    * Capture Buffer - Allows loading, saving of 3 buffers.
    * Screen capture facility.
    * Capture over time facility.
    * Impulse Mode
    * RT60 Reverberation Calculations
    * Peak trace facility for better reading of fluctuating frequencies.
    * Export captured data to text delimited files for PC analysis.
    * Smoothing (wide band averaging).
    * Compare / Transfer Mode.
    * Capture and Save Impulse files in WAV format.
    * Load and Analyse Impulse files.
    * Sine, Pink Noise and White Noise Generators.
    * Supports Screen Rotation.
    * Supports all known screen resolutions.

Kupovina i preuzimanje

RC Camera v2.1 for IP-cameras (AXIS, TRENDnet, Panasonic, Ipux, D-Link etc.)

IP cameras monitoring software for Windows Mobile 6.x.

Application uses a jpeg-mode of a camera (to reduce the traffic).
The communication with the camera is accomplished by the use of CGI-commands.
The definite commands are set in the camera working profile. Included
profiles allow the communication with TRENDnet, AXIS, Edimax, Ipux, Panasonic,
D-Link and Linksys cameras.
The ability of setting user's profiles, let the application be set for any
IP-cameras, supporting CGI-commands.

To set the connection to the camera up one should:
1. Fill in the parameters of your camera, choosing the ready
profile or setting a new one ("Menu/Settings" menu point).
2. Check them up ("check" button).
3. Add the new camera to sources list ("add" button).
4. Save the settings ("OK" menu point).
5. Tap on the menu point "Start" in the main window.

The basic operation can be chosen from the context menu (tap-and-hold).
A tap on the image renew it despoticly.
Double tapping on the picture switches the full-screen mode.
The folder for the saved snapshorts is set in the settings menu.
The sliding movement a finger on a screen can be use for operating a
camera's PTZ-control.

Besplatno preuzimanje

Spb Backup v2.1.0 build 3536

Requirements: WM2003-6.5, PPC, SP
Overview: SPB Backup is an application for creating backup copies of the data on your Pocket PC. It creates self-extracting compressed executables, thus making the backup and restore processes very simple and intuitive. Backup scheduling supported.

Backup
Save your data!
* Backup file compression
* Backup file encryption
* Storage card backup
* Full and custom backups

Scheduled Backup
Never again lose your data with automatic backup scenario!
* Automatic scheduled backups
* Automatic deleting of old backups
* Automatic reboot with SIM card pin code entering

Restoring
Control your data restoration!
* Can be restored after ROM upgrade (ROM upgrade mode)
* Can be restored on another device (device upgrade mode)
* Self-extracting executable backup files
* Selectable items to restore
* Separate text message (SMS) restoring
* The backup file can be explored with the desktop unpack tool

Synchronization
Keep your backup files on desktop
* Automatic copying backup files to the desktop
* Starting backup from desktop
* Restoring backup from desktop
* View the backup file content with the unpack tool

Version 2.1.0 (December 1, 2009):
• Windows Mobile 6.5 support
• Windows Mobile upgrade 6.1 to 6.5 support
• Small interface updates
• Various bug fixes based on user reports.