HTC HD 2 :: Mobilna telefonija ~ Operateri ~ Servisiranje ~ Smartphone

Tutorijal kako da na WM7 imate i Android na SD Karticu

Link TUTORIAL:

You can have Wp7 and android at the same time. You will have Wp7 in Nand and run android from the same sd card or another sd card that you will swap when you want to run Android from sd. You can't run wp7 and android from Nand at the same time however.

HOW TO PARTITION YOUR SD CARD TO HAVE A DUAL BOOT OF WINDOWS PHONE 7 AND SD ANDROID

The purpose of this tutorial is to detail a method on how to get wp7 and sd android sharing the same sd card. At present, if you want to have Wp7 in nand and android on the sd, you will have 2 choices. A. swap sd cards or B. Partition your sd cards as detailed hereafter. IMO partition the sd card as detailed hereafter is the safest route for a dual boot from the same sd card (instead of swapping sd cards) as wp7 will ruin an android sd card inadvertently left in the phone.

Wp7 uses a special format for its sd card and you cannot simply copy android on this partition as it is not accessible. Wp7 also creates a fat32 partition of 200 mb but this partition is too small to install an android build. I am not aware of any means to resize the Wp7 partition on the sd card either.

This is based on ike2903’s instructions and all credits go to him as well as to others on xda. I am not a developer and guess just got lucky getting things to work.

Note to moderators, if this post is in the wrong area, please move it to the correct one. Thanks.

WHAT YOU NEED:

1. TWO sd cards.

A large one and a smaller one. I am using a 8gb and a 16gb card. The larger one will be your permanent sd card and the smaller one will enable you to obtain a smaller partition to run wp7 that you will copy to the larger sd card.

2. Sd partition software.

I used EASEUS ALL-IN-ONE Partition Manager Software and it worked. It is free to download and here is the link

INSTRUCTIONS

1. Download and install Easeus Partition Manager.

2. Insert your small sd card into your phone. Flash WP7 Rom using Magldr 1.1.2. Let the phone reset and start wp7. This will allow WP7 to format your smaller sd card with its partition.

3. Turn off your phone and remove the smaller sd card.

4. Plug in both sd cards in your pc. The larger and the smaller one.

5. Run Easeus Partition Manager. You should see both the smaller and larger sd cards. On your smaller sd card, there should be 2 partitions. A fat 16 partition of 200 mb and another partition called unformatted which takes up the rest of the smaller sd. This “unformatted partition” is actually your wp7 partition. See attached picture.

6. Delete the partition of your larger sd card. To do this, select the partition and right click delete (menu also works). Don’t forget to click “apply”.

7. Copy and resize the fat16 partition of your smaller sd card to your larger sd card. To do this, select the partition on your smaller sd card, right click (or use the menu) and select copy and follow the onscreen wizard to copy. You can change it to fat32 as well. When resizing, you need to do some math. Take the size of your larger sd card and subtract the size of the “unformatted” partition of on your smaller sd card and set this value as the resize value for the fat16 partition that you are copying. In other words, if the unformatted partition is 8gh and you are setting things up on a 16gb sd card then set the resize value to approx. 8gb. Click “apply”

8. Using same procedure as outlined in 7, copy the “unformatted” partition from your smaller sd card to the larger sd card. Click “apply”.

9. Copy your android sd build onto the fat32 partition. (see below for list of working builds)

10. Remove the larger sd card and insert it into your phone.

11. Reboot the phone and hold the “red end key” to enter the magldr boot menu.

12. In Magldr 1.1.2 use volume down to go to “9. Services” and click “green phone button” to select.

13. Use volume buttons to select “1. Bootsettings” and click “green phone button” to select.

14. Use volume buttons to select “2. Always Menu” and click “green phone button” to select. This will give you the Madldr menu on phone startup to allow you to choose wp7 or sd android as your boot choice.

15. Click the “green phone button” to confirm.

16. Once you’ve done steps 12 to 15 you will be brought back to the initial magldr 1.1.2 menu.

17. Again, use volume down to go to “9. Services” and click “green phone button” to select.

18. Use volume buttons to select “1. Bootsettings” and click “green phone button” to select.

19. Use volume buttons to select “3. AD SD Dir” and click “green phone button” to select.

20. Select the folder where your sd android build is located.

21. Reset your phone and enter Magldr 1.1.2.

22. To boot into wp7 select boot “1. Boot WPH” or to boot sd android select “2. Boot SD AD”

23. Booting into android sd is long. Guess having android nand has spoiled us.

NOTES:

Make sure you backup your sd cards as wp7 will erase all that is on them.

This method works for me but i take no responsibility for whatever may happen to your phone.

You should be able to reactivate your phone with windows market but I cannot guarantee this. I have re-activated market 4 times so far.

TESTED SD BUILDS:

Not all sd builds work.

I have tried some older sd builds and could not get them to work as some files need to be modified.

This one works for me however:

[Jan 12][DL DesireZ v2.2][SD][PPP/RMNET][Base 1.72.466.4][SquashFS][UTF8&Arabic] Link: http://forum.xda-developers.com/showthread.php?t=881937

Just to be clear, I am running Wp7 in Nand and an android sd build on the same sd card.

If you are aware of android sd builds that have been modified and work please post the sd builds that work and I will try to update the list.

Thanks