Na forunu sam nasao ovu temu. Procitao sam sve. Sada zanima me dali je isti program i za moi mobilni i ako je sve isto gde mogu da nadjem fajlovi sa koim se flesuje telefon naravno za v535 i v80.

Evo nasao sam sta ce ti sve trebati: usb kabal,P2Kman-program preko koga flashujes,XVI32-hex editor i trebace ti ako mozes da nadjes neke podesavanja za taj fon kao za neki regisrty. Upustvo sam nasao ali je na engleskom i mrzelo me da prevodim valjda ces se snaci.
Postavicu ti i neke slike da se lakse snadjes.......

Installation:

    * First install Mobile Phone Tools. It should come with your USB cable, or you can try to find a copy on the web somewhere. You don't specifically need the program to customize your Vxxx, but the USB driver that comes with it is necessary. P2Kman includes it, I think, but I installed MPT first, so I'm not sure if this step is necessary or not. MPT rocks - install it. You'll like it.
          o To verify installation of the USB driver, connect your phone to the computer via the USB cable and go to Control Panel > Phone and Modem Options and select the "Modems" tab. You should see one (or more) copies of 'Motorola USB Modem' and one of them should have a COM port underneath...

# Next, install P2Kman. Installation is as simple as unzipping the archive and running p2kman.exe. Have your phone plugged in to the USB cable and the USB cable plugged in to your computer. When you first run P2Kman, a bunch of drivers will install:

    * Motorola USB Device: Accessories Interface
    * Motorola USB Device: Communications Class - Communications Interface
    * Motorola USB Device: Communications Class - Data Interface
    * Motorola USB Device: Data Logging DSP Interface
    * Motorola USB Device: Data Logging MCU Interface
    * Motorola USB Device: Test Command Interface
    * Sound, video and game Controllers: USB Audio Device

If Windows can't find the driver (pretty likely), you'll need to point it to the directory where you unzipped P2Kman. There should be a subdirectory called 'drv' in there. That's where the driver for all these devices is. It's called p2k.sys.

If you get the Completing Found New Hardware Wizard a bunch of times, that's good.
To verify everything's installed, double check that everything is in your device manager. Right Click My Computer > Properties > Hardware > Device Manager.
When P2Kman says 'Connected' (bottom left of the status bar) and you can get a file listing (click "Update list"), you're in business. You may have to restart P2Kman.Finally, install XVI32. It's as easy as unzipping the archive and running XVI32.exe. (No strings this time - it doesn't require any drivers.)

Using P2Kman to Download and Upload:

Downloading the Files You'll Need to Edit:

    * Connect your phone to your computer, open P2Kman, and wait for it to say 'Connected' and get a file listing.
    * We're going to download a few 'seem' files and some other files from your phone. We'll start with the seem files.
    * You'll see a box at the bottom center of P2Kman called "Seem." In it, you'll see some text boxes and two buttons: "Download seem" and "Upload seem".
    * We need the following seem files:
          o 0025_0001.seem
          o 004a_0001.seem
          o 0032_0001.seem
          o 0061_0001.seem
          o 0062_0001.seem
          o 010a_0001.seem
          o 0126_0001.seem
          o 01a8_0001.seem
    * To get these seem files, we type the first number in the "From" and "to" boxes.
    * So to get 004a_0001.seem type "004a" into the "From" box and "004a" into the "to" box. Then click "Download seem".
    * [Screen Shot]
A "Save As" dialog will come up. Browse to the directory where you want to save your files. Where it says file name, LEAVE THAT AS "xxxx_yyyy.seem" - this is important, because it won't save the seem if you change the name from that.# Repeat this process to get the other seems you need.
# We also need a few other files from the phone.
# If you haven't gotten a file listing from P2Kman yet, you can do so by clicking the "Update list" button in the Files area.
# Expand the directory tree (upper left portion of the window) and find the "system" folder.
# You need to find the files "mma_ucp" and "mma_dcp".
# Highlight them and click "Phone >>> PC". You can then save these files to your computer. # We also need the file "gain_table.bin" and it's in the root directory on the directory tree: "Vxxx (/a)".
# Download it the same way you got the mma files.
# VERY IMPORTANT: Make backup copies of all of the files you got off your phone. This is extremely important, because if you mess something up, you can always go back to 'the way things were' before you starting changing things.
Uploading Edited Files to the Phone:

    * Connect your phone to your computer, open P2Kman, and wait for it to say 'Connected' and get a file listing.
    * If you want to upload a seem file, enter the seem and record number in the "Seem" and "rec" boxes.
          o For example, for 0032_0001.seem, the seem number is 0032 and the record number is 0001.
          o Then click the "Upload seem" button, browse to the folder where the modified seem file is, and click ok.
          o If you're successful, you'll see "uploading seem N 0032record N 0001 ok" - the "ok" at the end means you've done it properly. f you want to upload a regular file to your phone, the process is similar.

    * You must select the directory you wish to upload the file to in the directory tree area.
    * For example, the mma_ucp file needs to be uploaded to "/a/mobile/system/" so be sure to select "system" in the directory tree. # hen click "PC >>> Phone" and find the modified file, and click ok.
# If you're successful, you'll see "File upload... /a/mobile/system/mma_ucp ok" - the "ok" at the end means you've done it properly.
# Note that mma_ucp and mma_dcp must be uploaded to "/a/mobile/system/" and gain_table.bin must be uploaded to "/a/".
Now click "Restart phone" and once your phone reboots, double check that the appropriate changes were made.

HEX Editing with XVI32:

Overview:

    * First let's take a look at XVI32 and familiarize ourselves with its features.
    * Open XVI32 and open the 0032_0001.seem in XVI32 just to take a look.
    * On the main screen, you'll see two columns. On the left side is the "HEX" representation of the file. On the right side is the "ASCII" or text representation of the file.
    * When one of the columns is shaded, that means it's inactive and you're working with the other side. In the screenshot below, you'll see that I'm working with the "HEX" side.
    * Take a look at the status bar at the bottom of the screen. You'll see "Adr. Hex" when you're working with the "HEX" side. This is the hex offset, or the location of where you are in the file. This is very important. I'm at offset 35 right now.
One last thing, when working with SEEM files, each hex offset has eight bits or "switches" which can control up to eight different settings on your phone. When we adjust one of these settings we have to change the proper bit. XVI32 has a nice tool called "Bit Manipulation" under the tools menu. Go ahead and select it. You'll see that for the offset that I'm looking at, bits 7, 6, 5, and 3 are checked or set to "1". Bits 4, 2, 1, and 0 are unchecked or set to "0". When adjusting settings in the SEEM files, you'll be referred to an offset and a bit within that offset to adjust. Use the bit manipulator to do this and only change the bit that is referenced. Remember, checking the box sets that bit to 1 and unchecking the box sets it to 0. Be sure to click "Set" after you check or uncheck to actually make the changes in the file.
Adjusting Gain (Volume) Settings:

    * Open gain_table.bin in XVI32.
    * To adjust the earpiece gain, go to offset 0D (in Adr. Hex, you'll only see "D"). The default value is 01, and you can adjust the settings in the gain_table.bin from 00 to 08. "00" is silent, and "08" is as loud as possible. You'll see that I've changed my earpiece gain to 08. Save the file, upload it to your phone, reset the attribute to "4", and restart.

ctivating/Deactivating Phone Functions by Adjusting Seem Settings:

    * Open the 0032_0001.seem file in XVI32.
    * Say you want to activate SMS Delivery Reports.
# So go to offset 3D in the 0032_0001.seem and then select Tools > Bit Manipulation.
# You'll see that bit #1 is unchecked meaning it's set to "0". Check it and that will set it to "1". Click "Set" and you'll notice that the value in offset 3D changed.# mportant: Leave all the other bits alone - do not change them. Other bits may be checked or unchecked, but don't worry about it.
# Save the file, upload it to your phone, and restart.
# NOTE: If you activated Engineering, AIM, IM, MobileQQ, or Videos and the menu item does not appear, you may be required to update your menu file. See the section below titled "Activating Menu Items for Special Features".
# For a list of all settings we've found so far that you can change in the seem files


Troubleshooting:

    * I can't get P2Kman to recognize my phone.
          o Did all the drivers install properly?
          o Did you try restarting your phone and trying it again?
          o Did you try restarting your computer and trying it again?
          o What type of USB cable are you using? I hope it's a Motorola OEM one.
          o Did you install MPT first? Is the phone recognized using that software?
          o Is the phone recognized as "Motorola USB Modem" when you first plug it in?
          o Does Windows recognize that there is any type of USB device plugged in? Check the device manager.
          o Did you try installing PST? That sometimes works. I can't tell you where to get it, though, as it's not freeware.
          o Have you tried manually installing the drivers? Go to Control Panel > Add New Hardware > Select from List > Have Disk and point to drv/p2k.inf in the P2Kman folder.
    * I uploaded my edited gain_table.bin to my phone and I don't notice any difference.
          o Did you change the correct offset?
          o Was the value you changed the offset to between 00 and 08?
          o Did you save the gain_table.bin before you uploaded it?
          o Did you set the upload path on P2Kman to "/a/"?
          o Did you use the "PC >>> Phone" button? (Don't use the "Upload seem" button!)
          o Did you restart your phone?
    * I uploaded the seem to my phone and I don't notice any difference.
          o Did you change the correct bit of the correct offset?
          o Did you save the seem before you uploaded it?
          o Did you enter the correct seem and record number in P2Kman properly?
          o Did you use the "Upload seem" button? (Don't use the "PC >>> Phone" button!)
          o Did you restart your phone?
          o Was your change Engineering, AIM, IM, Mobile QQ, Videos, Bluetooth, or Quick Menu?
                + If so, did you check your mma_ucp and mma_dcp files? See the section "Activating Menu Items for Special Features" for more info.
 

to bi trebalo da bude dovoljno ako bude problema javi...
ps. ovo ti za v80 i uopste za vxxxxxx motorole

e moj savet ti da uzmes fles vxxx hardcore fles imaces funkciju video zapisa i vid playera na twojoj v525.pozz

moze li se dodati video zapis na motorola v400

Pa ja mislim da ne moze jer to je prilicno stari fon...

ma mislim da mozes tako sto mu promenis seem i flex podatke
tako se govorilo da E398 nemoze da ima video a ima ga zahvaljuuci tim programima sto menjaju seem i sto menjaju flexznaci moze