Zbog potraznje na PP, evo malo info-a kako uhvatiti screenshot preko PC aplikacije, a vezano za java telefone

Aplikacija se zove Display Reader i posto je dzabaka, uploadovacu je na forum

Prvenstveno je namenjena za hvatanje screenshota Sony Ericsson Java telefona (mada autor tvrdi bi trebalo i da radi vecina drugih java telefona).


slika (ko ne veruje  )



1) konekcija mora ici preko USB kabla !
2) Aplikacija je portabilna
3) Kada povezemo racunar sa mobilnim (preko kabla) treba izabrati port i kliknuti na Connect.
--> za screenshot kliknuti na dugme Read.

4) Otvoriti paint i ici na paste.

What is JL_Cmder?
JL_Cmder stands for JavaLoader Commander. JavaLoader is a command line tool provided by BlackBerry. JL_Cmder simplifies accessing the most commonly used JavaLoader commands.

Are there any system requirements?
Yes. You must install BlackBerry Desktop Manager or BlackBerry USB and Modem Drivers. Both are available from the BlackBerry website.

What can JL_Cmder do?
Below is a brief overview of the available commands.
deviceinfo - Displays information about the handheld.
eventlog - Retrives and displays the handheld event log.
screenshot - Takes a picture of the handheld screen. (OS 4.0.2+ required)
wipe - Erases the handheld OS. Not really, but that is the simpleist way to explain it. After using the "wipe" command the device will be completely inoperative until the OS is reinstalled. (Error 507 will be displayed on the device)
resettofactory - Removes the IT Policy from the device and wipes the device of personal data while leaving the OS installed and usable. (OS 4.3+ required).
NOTE: If you want to use an unlisted JavaLoader command select Command-Line Usage from the menu. This will display JavaLoader help information including syntax and all available commands.

Installation Instructions
Download JL_Cmder.
Extract executable.
Double-click on executable.
Vista Users: Right-click on executable and select Run As Administrator.

Tematika koju cemo danas obraditi je sledeca: kako koristiti Pocket PC kao eksterni GPS modul
(za laptop, recimo )

GPS 2 Blue

--> It transforms your PocketPC into an external bluetooth GPS receiver !

(allowing you to use it with your laptop PC or any other device which can use a bluetooth GPS.)
[Since version 1.4, GPS2Blue also allows to redirect GPS data to a TCP/IP port. ] 

 It can also log to a file the data received from the GPS. Another feature is the PDA clock adjustment based on the precise GPS satellites clock.

This utility has been tested on Mio A201, Mio A701, Mio P550, Asus A636, FSC Loox N560, FSC Loox N500, FSC Loox N520, Qtek G100, iPaq 4150, Yakumo Delta X, HP iPAQ 6965, HP iPAQ HW6515, HP iPAQ HW6910, HP iPAQ HW6945, E-Ten G500, Asus A639, HP iPAQ H6340, HTC X7500, Airis T620, HTC TyTN II, O2 XDA II mini, HTC Touch Cruise... It works surely on most Windows Mobile 2003, Windows Mobile 5 and Windows Mobile 6 Classic (and Professional) based PDA...


I've written GPS2Blue for my own use. It is firstly inspired from GPSRedirect... It can be freely downloaded and used, at your own risk, I don't make any support. Microsoft .Net Compact Framework 2 must be installed (note: Microsoft releases .NET Compact Framework 2.0 Service Pack 2 which can be easily installed on storage card...).

http://users.skynet.be/hofinger/GPS2Blue.html

http://users.skynet.be/hofinger/GPS2BlueFAQ.html#USB



(dodatno: http://www.mobilitydigest.com/forums/showthread.php?t=2655 )
(tutorial: http://forum.smartphonejunkie.com/f293/how-use-ppc-external-gps-receiver-laptop-195624/ )


========================================
A sada jedna aplikacija za PC po uzoru na HTC Sense
========================================

HTC sat sa vremenskom prognozom za vaš Windows desktop



Preuzimanje možete obaviti na adresi http://htchome.codeplex.com/



Klip sve objasnjava

SuperOneClick v1.5.1 (Root, Unroot, Enable Non-Market App, Get UNLOCK code)



I made it. I tested it. It works.

Here's a one-click root that works with Froyo on our Captivates. It's not just the Captivate. It works with almost all phones and all android versions. (including the i9000, Droid, Nexus One)

The program requires Microsoft .NET Framework 2.0+ or Mono v1.2.6+
Operations systems with native support:
Windows Vista
Windows 7
Ubuntu Hardy (8.04 LTS)
Ubuntu Jaunty (9.04)
Ubuntu Karmic (9.10)
Ubuntu Lucid (10.04 LTS)
Ubuntu Maverick (10.10)
Debian Lenny (5.0)
Debian Squeeze (testing)
Debian Sid (unstable)
Debian Experimental

If you run Microsoft Windows XP, install .NET Framework v2.0 or above
If you run Mac or another Linux flavor, make sure you install Mono:
http://www.go-mono.com/mono-downloads/download.html

For more information about making it work in linux:
See here


You NEED to put your phone on USB Debugging mode and make sure you DO NOT mount your SD card. If you still can't get something to run, try doing it in recovery mode.

Read me: (READ BEFORE POSTING)
10/17/2010:
Thanks to all that donated! I was worried for a bit but you guys proved me wrong. So, I fixed the NMA (non market apps) button. It should now install sqlite3 and busybox into a temporary folder if you don't have it. I added an unroot (by popular demand). I did some major code clean up, so you can expect faster releases from here on out. Next version will add sqlite3 and busybox to the /system partition included in root.

If you're having issues with "wait for device" or if RATC is looping, try this
Unplug your USB Cable
Go to Settings > Applications > Development
Uncheck USB Debugging
Plug in your USB Cable
Unplug your USB Cable
Check USB Debugging
Plug in your USB Cable

10/13/2010:
I need people with issues to post their device model and if they tried rooting in recovery mode. All posts ignoring the read me will be ignored. (meaning nma complaints and those NAND locked devices).
I'm getting flooded with replies, PMs and emails. Seriously, try reading a few posts back.
The program has been downloaded over 5000 times and only 2 people have have donated. I see donations as signs of gratitude. Even if it's 25 cents, please donate.
When I find the time (and will) I will work on the v1.5 release.
The rageagainstthecage looping is by design. Bad usb cables and ports can cause ratc to not run properly so I have it loop until it works. The "waiting for device" hang is for the same reason. There's nothing wrong with my application. It's usually your usb cable or port. This is not a cop-out answer. This is not an excuse as if I didn't know why it happens. This has been investigated and the problem is USB connectivity. It happens with my Captivate as well.

10/11/2010:
Enabling market apps isn't working unless you have busybox installed. I plan to fix this in the next version. The problem is, different devices have different locations for the com.provider.android.settings/settings.db and I was using the 'find' command to find your settings.db location. I didn't realize this was a busybox command not internal. That will be fixed.

I also added some information about root that I think people should read and classified different root levels.

By classifying root levels, I make it easier for the users to know if certain options will work or not. For example, enabling non-market apps will only require a Level 1 root, meaning it will work with the HTC Aria

Donate

Donate if you wish... (:


Incompatibility list

With the absolutely beautiful ADB exploit I use, titled rageagainstthecage (ratc), absolute ALL devices can be rooted. This is because it exploit is ADB which all devices use. There is an issue though. Some devices have a NAND lock which does not allow you to write to the /system mount. Because of this, you can't copy su, sqlite or busybox to /system/bin. This creates some issues but there is a work around. For things that don't need access to /system (like enabling non-market apps) I can use the ratc exploit to make those changes. If your device cannot use su in /system/bin then you can simple select a checkbox (as of v1.5) that says to use ratc.

There are 3 levels of "root" we can define:
Level 1: Shell Root (with ratc rooting the adb shell but no /system write access)
Level 2: Temporary Root (/system/bin/su installed but lost on reboot)
Level 3: Full Root (/system/bin/su installed and sticks)




The following devices have a NAND lock by default. SuperOneClick will only give you a Level 1 root:
Sprint EVO 4G (HTC Supersonic)
Droid Incredible (HTC Incredible)
HTC Desire GSM
HTC Desire CDMA (HTC BravoC)
HTC Aria
Droid Eris (HTC DesireC)
HTC Wildfire (HTC Buzz)
These devices can use http://unrevoked.com to open access /system and then subsequently, permanently root (Level 3).

The T-Mobile (HTC) G2 has something different which may or may not be a hardware flaw. I have yet to really research the device, but while it may root, it won't be permanent since copying /su to /system/bin/su has problems. I believe this is a Level 2 root, but to be honest, I need to research more.

All other devices has a Level 3 root via SuperOneClick

Version changes:
v1.5.1
Untested Mac and Linux support (you need Mono)

v1.5
Fixed Non Market Apps
Added Unroot
Added separate Shell Root (rageagainstthecage) button
Lots of internal code clean up.

v1.4
Changed main form's name to SuperOneClick from RageAgainstTheCageGUI
Enabled Captivate - Get Unlock Code button
Added a messagebox to confirm if Non Market Applications are enabled
Made "Enable Non Market Apps" FULLY universal
Added initial message telling you to remember to allow superuser commands (when enabling Non-Market Apps)

v1.3
Removed busybox for space reasons. Changed the layout. Fixed issue where application stayed running in the background. Added Non Market App button.

v1.2
Added a detection to see if RATC was already working.

v1.1
Universal device support. Application now finds your /system path.

v1.0
Initial release.

Development Plan:




Scheduled for next major release
Linux support via mono-project
Add a check box to use su or rageagainstthecage for other scripts (like Enable NMA)
Better error handling for devices with NAND lock on /system
Have options show what level root is needed (0,1,2,3)

To do list:
Jupiter fixes
Custom scripts support
Plugin support
Mac support via mono-project
Linux support via mono-project

Wishlist:
None
Thanks to basily, I have an Captivate v2.1 nv_data.bin I can test with to create the unlock button.
I need a mac/linux user to help me. PM so we can chat on AIM/Google

Courtesy of TheUnlockr.com, here's a step-by-step video:


Info & Download

^ Odlicna app 

ImTOO iPhone Ringtone Maker 2.0.10 Build 1116



ImTOO iPhone Ringtone Maker 2.0.10 Build 1116 | 22.23 MB

Tired of buying iPhone ringtones from iTunes? Well here's your solution. Introducing the ImTOO iPhone Ringtone Maker – a smart iPhone ringtone creator offering an all-in-one iPhone ringtone making and converting solution. Now you can make ringtones for your iPhone from almost all video and audio formats (including AVI, MPEG, WMV, DivX, MP4, H.264/AVC, MKV, RM, MOV, MP3, WMA, WAV, RA, M4A, AAC, AC3, and OGG.), and then transfer them to your iPhone directly.

Key Features:
* ImTOO iPhone Ringtone Maker can create fade-in and fade-out effects for your ringtone.
* More features than ever before: adjust the ringtone volume; rename the ringtone and more.
* Set the ringtone duration and create it to the millisecond.
* Add files easily and conveniently with drag and drop.
* Trim a video or audio file to retain the desired segment and convert it to M4R iPhone ringtone.
* This ringtone maker fully supports iPhone, iPhone 3G, iPhone 3GS and iPhone 4. iOS 4.1 is supported now.
* Add your song or video to the software and turn it into an iPhone ringtone quickly and easily.
* Play the video/audio file with the built-in player before converting to ensure it is the ringtone you want to create.
* Concise and user-friendly interface to simplify your iPhone ringtone making experience.
* Four language interfaces are available: English, German, Japanese, and Chinese.

Uz svo duzno postovanje prema clanovima i ovom forumu zamolio bih vas da ne duplirate teme i time moje nekadasnje radove na ovom forumu marginalizujete.
Ovo je originalna tema o PC programima za mobilne telefone:

Posebni PC File Manager-i Za Rad Sa Mobilnim Telefonima!

Naravno, ovo su moderatori trebali znati i uputiti na vec postojecu temu.
Hvala!

Svaka cast za temu koju si predstavio. Angazman oko nje ti ne spori niko. Ali da si prelistao ovu temu, video bi da ova tema nije ogranicena na "file managere".

--> Tacno je da su i oni sastavni deo PC aplikacija koje treba predstaviti, ali uoci da se ne zadrzavamo tu

Dakle, rezimirajmo:
--> pored posebnih file managera (koji su jedna oblast PC aplikacija), komercijalni bluetooth driveri, konvertori (video, audio, pdf transformacija), eksploatacija kamere telefona (merenje razdaljine), remote monitoring, bulk SMS managging, upotreba G-senzora i komunikacija sa PC-em, kreatori pozadina, standalone konvertori kontakata, transformatori telefona u GPS risiver, sminkerski gadgeti sa popularnim temama iz telefona,

.....

dakle, sve, sve i sve sto ti padne na pamet od PC aplikacija gde ima neki dodir sa mobilnom telefonijom u najsirem smislu. Kada sam otvarao ovu temu, tako sam je zamislio.

Hvala sto si nas podsetio ovim linkom na jednu stariju temu koja je samo jedan segment ove citave price koju pokusavam sa ostalim zainteresovanim clanovima foruma da odrzavam.

A sada da predstavim jedno lepo resenje za migraciju izmedju razlicitih platformi 

[da, to je jos jedna oblast PC aplikacija... ]

Sprite Mobile




Slika govori vise od 1000 reci. Podrzane su razlicite kombinacije platformi. Svakako isprobajte 



http://www.spritesoftware.com/Products/Migrate/Migrate-Your-Data-Now/How-To-Transfer

MyPhoneExplorer v1.8

Za SonyEricsson i Android telefone

Features:

    --> Adressbook - with direct sync to Outlook, GMail, Windows contacts, Thunderbird, SeaMonkey, Lotus Notes and Tobit David
    --> Organizer with calendarview and direct sync to Outlook, Google, Sunbird, Thunderbird, SeaMonkey, Windows calendar(Vista), Rainlendar, Lotus Notes, Tobit David and net shared calendars (WebDAV, FTP, local)
    --> SMS - archive, export, import, excessive messages,...
    --> Filebrowser with cachesystem to minimize datatransfer, automatic photosync...
    --> Set phoneclock based on atomtime
    --> and much more. f.e.: calllists, edit profiles, control phone, memorystatus, phonemonitor,...

Description:

Connect your phone via cable, bluetooth or infrared and you'll be surprised how easy and efficient you can manage your phone with this compact software. Since it's first appearance MyPhoneExplorer evolved into the most popular freeware tool for SE-phones and is constantly extended by new features. Since version 1.8 MyPhoneExplorer supports also Android-based phones (connected via WiFi or USB cable)




Proizvodjac