- U ovom postu: HTC Telefoni; Fleshovanje MPx200 na Windows Mobile 5; Qtek 8310 ROM Update; MPx220 ROM Update

 - Boot mode ili fles mode

 - Samsung i300,i300x & i310 ROM Update

::Upgrade WM telefona::WM Upgrade::Upgrade WM telefona::WM Upgrade::Upgrade WM telefona::WM Upgrade::Upgrade WM telefona::WM Upgrade::Upgrade WM telefona::WM Upgrade::Upgrade WM telefona::WM Upgrade::Upgrade WM telefona::WM Upgrade::Upgrade WM telefona::WM Upgrade::Upgrade WM telefona::WM Upgrade::Upgrade WM telefona::WM Upgrade::Upgrade WM telefona::WM Upgrade::Upgrade WM telefona::WM Upgrade::Upgrade WM telefona::WM Upgrade::

HTC Telefoni Upgrade from WM2003SE to WM5

Upgrejdovanje vaseg telefona koji ima WM2003SE na WM5
Download-ovati Odgovarajuci rom za vas HTC telefon.
Unzip-ujete wm5xxxxx.bin fajl iz arhive na C:\ i rename-ujete na wm5.bin.
Iskljiciti USB konekciju u ActiveSync `Connection Settings`.
Iskljuciti telefon i diskonektujete USB.
Pritisni dugme Camera i drzeci to tokom ubacivanja USB u konektor (or holding Camera button press Power button for 1-2 seconds).
Kada vam se pojavi "Need an UI (0)?" na ekranu pritisnuti dugme 0 obavezno. Vidicete 3boje na ekranu, u plavoj zoni ce se nalaziti "Typhoon IU" poruka, ako vidite "Typhoon XIP" onda ste zakasnili u pritikanju tastera 0,u pocetku ove operacije.
Startovati mtty1.42.exe iz ahrive, i izabrati [USB], pritisnuti taster Enter i vidice te pitanje da stavite na polju lokaciju ROM-a.
Ukucati u polju "l c:\wm5.bin" naravo bez navodnika i pritisnuti taster Enter.
Cekati dok se telefon nebude Flesovao i kada se pitanje bude ponovo ponovilo,u praznom polju ukucajte "ResetDevice" i pritisnuti taster Enter da bi restartovao telefon ili samo iskuciti pa onda ukljuciti fon.

WM5 ROM Upgrade for HTC Models:

HTC Typhoon WM5 ROM



Orange C500

I-Mate SP3

Qtek 8010
                                             
Audiovox SMT5600

Dopod 565


HTC Feeler/Sonata WM5 ROM



I-Mate SP3i

Qtek 8020

O2 XphoneII

Dopod 575

T-Mobile SDA


HTC Amadeus WM5 ROM




Qtek 8100

T-Mobile SDA Music

O2 XphoneIIm



-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+

Fleshovanje MPx200 na Windows Mobile 5

Napomena: Za WM5 Vam treba SD ili MMC kartica od najmanje 32 MB(pogledajte 1. post, pod 1) Takodje ce Vam trebati i Motorola Upgrade Wizard.

*Pod prikljuciti telefon podrazumeva se da je telefon ugasen i da se pri ukljucivanju USB-a u telefon drzi dugme za LEVO na vasem joysticku.

*Master Reset se radi tako sto dok je telefon ugasen pritisnete i drzite plavo dugme, i ne pustajuci ga ukljucite telefon. Pojavljuje se pitanje "Master Reset?" i vi odgovarate sa "Yes" (Na WM5 ovo nije slucaj - potpuno je drugaciji meni za Master Reset)

*Pre svega iskljucite telefon i napunite bateriju do kraja.

*Baterija je puna kad mobilni zavibrira 3 puta(kad je ugasen).

1. Izvaditi SD and SIM karticu i prikljuciti telefon.
2. Flashovati sa fajlom "part1.img".
3. Iskljuciti telefon sa USB-a i izvaditi bateriju.
4. Vratiti bateriju. (Preporucujem da ovde napunite bateriju do kraja radi njenih maksimalnih performansi)

5. Uraditi Master Reset.
6. Nakon reseta ce se pokrenuti Windows i prijaviti vam da na vasem telefonu ne mozete koristiti ovaj windows jer niste clan microsoftovog osoblja. Ugasite telefon.
7. Izvadite bateriju i vratite je nazad.
8. Ubacite memorijsku karticu i prikljucite telefon.(Upozorenje: svi podaci sa kartice bice izgubljeni)
9. Flashovati sa fajlom "part2.img".

*Moze vam se desiti da Mobile Upgrade wizard nece da pronadje vas telefon. Diskonektujte ga, izvadite i vratite bateriju pa ga opet konektujete.

10. Flashovati sa fajlom "part3.img".
11. Diskonektujte telefon, izvadite bateriju, stavite SIM i vratite bateriju. (Preporucujem da ovde napunite bateriju do kraja radi njenih maksimalnih performansi)

12. Krenite da radite Master Reset ali ce se pojaviti drugacije opcije. Koristeci gore/dole i plavo dugme ukljucite drugu i trecu opciju (2. Clean Reg Hive 3. Format Storage).
13. Nakon izvrsenog reseta budite strpljivi jer moze da potraje prvo paljenje telefona.

Srecno!




-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+

Qtek 8310 ROM Update

Just thought I would create a step by step guide to help impart the process I followed to get my Qtek 8310 to run the newly released official AKU2 ROM. The upgrade initially came up with "Invalid Vendor ID" so I had to follow a few more steps from multiple forums to get around it - I have just aggregated those steps here.

This is NOT an official or guaranteed method to install your Qtek ROM - I AM NOT RESPONSIBLE FOR ANY FAILURE OR PROBLEMS YOU MAY EXPERIENCE.


1. Get the latest ROM for the Qtek 8310 by logging in to http://www.myqtek.com to get it.

2. Reset device to manufacturer defaults before attempting to install the update - this should reduce the likelyness of problems occuring. A utility for doing this is under "Accessories > Clear Storage".
NOTE: you will lose all your data if it is not on the Storage Card.

3. Wait for the phone to rebuild to manufacturer defaults and try the Qtek ROM upgrade (see step 13 & 14).

IF you get "Invalid Vendor ID", like I did because "I'm not a brightpoint customer ", then you will have to change the phone's identifier lock or 'CID'.
NOTE: Changing the CID will invalidate your warranty.

4. To change CID first get RegEditSTG.zip from the attached files link at the bottom of this post. Connect up your phone to the PC and copy the ZIP FILE not the EXE to your phone and unzip the exe on the phone.

5. Run the regeditstg exe file (once unzipped) change the following keys to APPLICATION UNLOCK your phone. This is required to be able to install the .CAB file to enable you to change the CID.

Navigate to: HKLM\Security\Policies\Policies\
Click "Values" soft-key
Change "00001001" value to 1 (decimal) (recovery note: default is 2)
Change "00001005" value to 40 (decimal) (recovery note: default is 16)
Change "00001017" value to 144 (decimal) (recovery note: default is 128)
Add new value "0000101b" and assign it DWORD = 1 (decimal)
Reboot your device.

These changes now mean you can run unsigned software such as the CID changing software.

6. Download-ovati SPV-Services Ovde.

7. Unzip the file on your PC. Copy the Cert.CAB file to your mobile device. Then use the phone's file manager to browse to the file and then run it. It should flash up a warning about being unsigned - just click "yes" and let it install.

8. Reboot the phone again.

9. With the phone still connected to the PC and on, run the SPV-Services.exe from the SPV-Services zip file you should have unzipped on your PC.

This will load the SPV-Services program.

NOTE: This program does not work well with IE 7 or alternative browsers, try to make sure your PC has IE6 if possible!

10. Click "CID Tool (Alpha)" on the left hand side - it will attempt to read the CID from your Phone. (Mine read it fine without issue following this method...

Once it has, copy and paste the CID number that was collected to your PC in a text file to make sure you have a backup for whatever reason.

11. Click the "Set CID to 1111111" button and be patient. Do not switch your phone, restart your computer or unplug the phone!

Changing the CID to this SuperCID your phone able to accept the new Qtek 8310 ROM. As I have said this process will invalidate your warranty.

12. Wait for the process to complete successfully. Reboot the phone.

13. Try the ROM update again, read all the instructions carefully and do not get impatient. My Update got stuck at 93% for like 4 mins before continuing to successfully update.

14. Your Qtek 8310 will have to rebuild itself which is also a slow process but be patient and you should now be upgraded to the latest version ROM.




-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+

MPx220 ROM Update

Prvo pokrenite program pod nazivom motorola mobile update wizard i pojavice vam se ovaj prozor koji kaze da preko njega mozete da upgrade-ujete vas telefon……. Kliknite na     NEXT. Telefon jos ne spajajte



Posto ste kliknuli na next, pojavice vam se prozor u kome treba da  odredite model vaseg telefona, posto mi ovde pricamo o MPx220 izaberite taj model.



Kada izaberete model kliknite na next......



Dolazimo do drugog koraka, citajte upustvo koje kaze da iskljucite fon, izvadite bateriju i ne spajajte telefon sa USB-CE KABLOM!
PS. Izvadite i mem karticu ako imate......



Treci korak vam kaze da izaberete vas rom, nadjite ga u svom racunaru gde ste ga prethodno otpakovali. Kliknite na BROWSE I nadjite rom, evo kao to izgleda…..







Posto ste to uradili kliknite na next....



Pojavice vam se ovaj prozor...



Nista ne radite dok vam se ne pojavi novi prozor, koji kaze vam da ubacite usb kabl ali izvadite bateriju ako prethodno niste. Posle toga kliknite na OK....



Kada ste to sve odradili telefon je spreman da pocne sa flasovanjem, pojavice se ovaj prozor.....



Sada se uspostavlja komunikacija izmedju fona I kompa. Kada se uspostavi komunikacija pocece sa flashovanjem fona I kada se  popune oba buffera flashovanje je zavrseno, dobicete opomenu da skinete fon sa kabla I da mozete da ga upalite, naravno prvo vratite karticu I bateriju. SRECNO





::Upgrade WM telefona::WM Upgrade::Upgrade WM telefona::WM Upgrade::Upgrade WM telefona::WM Upgrade::Upgrade WM telefona::WM Upgrade::Upgrade WM telefona::WM Upgrade::Upgrade WM telefona::WM Upgrade::Upgrade WM telefona::WM Upgrade::Upgrade WM telefona::WM Upgrade::Upgrade WM telefona::WM Upgrade::Upgrade WM telefona::WM Upgrade::Upgrade WM telefona::WM Upgrade::Upgrade WM telefona::WM Upgrade::Upgrade WM telefona::WM Upgrade::

Evo nacina kako da prebacite Dopod S300, imate SmartFlip or Qtek 8500.... u Boot mode ili fles mode

1) Iskljucite telefon
2) Pritisnuti i drzati Camera dugme i voice notes/comm Dugme U isto Vreme
3) I kada jos drzite Camera and Comm tastere, Pritisnuti power taster

Boot Loader screen bi trebalo da se pojavi.

Samsung i300 ROM Update

Samsung I300 ROMs

Flasher I300 1.29 MB
I300XXEFA4 31.32 MB
I300XXEJ8 32.03 MB
I300XXFB2 32.59 MB
i300X%20JVFA3 30.47 MB

Za pocetak potreban vam je PDA_Flash_I300 (version 1.2) i neki rom.

1 - Za pocetak potrebno je da se instalira program.



2 - Pri instalaciji programa, zavisno od verzije flesera, moze da zatrazi sifru, samo idite na next.



3 - Sada spojite ikljucen telefon na USB, pretoga izvadite bateriju.

4 - Prikljucite telefon na usb i drzite Strelicu i Crveno dugme nekoliko secundi i komp bi trebalo da pronade dva drajvera koji se dobijaju uz PDA_.Flash program.

5 - Startujte program PDA_.Flash:



 A - Putanja ROM-a
 B - Informacije o ROM-u
 C - Ucitavanje ROM-a
 D - Startovanje
 E - Prekid
 F - Status povezanosti telefona
 G - Linija statusa ucitavanja fjla u telefon

6 - Proverite da li u direktorijumu gde se nalazi rom ima ovih fajlova:

1)SMARTFON.bin
2)OPERATOR.bin
3)OEM.bin
4)LANG.bin
5)EBOOT.bin
6)CPUOPT.bin
7)CHAIN.bin

 Zatim ucitajte chain.lst koji se nalazi u direktorijumu roma u folderu PDA, kliknite na dugme D , pojavice se prozor USB connecting...:



 i sacekajte nekoliko minuta i prijavice u desnom donjem uglu bee i to znaci da je flesovanje gotovo, sikljucite   telefon iz usb-a i uradite hard reset telefona.

Kako da vas MPx220 da manulano da bude u Boot Mode/Fles Mode
1) Iskljucite bateriju i spojis fon sa kompom naravno preko USB-a
2) i u trenutku kad spajate preko USB-a vi drzite taster za paljenje i levo dugme na joystick-u i pojavice vam se Fles Mode 
 

tako izbaci malo cudan flash boot ispravno se ulazi sa volume down i power dugme


pozz

How to make proper upgrade my i600 device to WM6Standard

What you need to know before start:

- update won't work in Windows Vista (boot loader can't find files)
- for some case samsung modem driver should be instaled before upgrading from earlier versions
- phone must be charged to full (3 bars)
- eject miniSD card.
- get write S/N phone
- don't unplug phone while upgrading
- don't try to upgrade i607 with i600 roms
- do it on your own risk
1) First, you need to upgrade i600 to XXGD1 version

http://rapidshare.com/files/29071310/i600XXGD1.rar

- download XXGD1 update, unpack file i600XXGD1_REV15.exe
- if it's your first upgrade, you should install samsung modem driver
- connect usb cable to PC,  ActiveSync must find device,
- go to options and disable: usb connection
- turn off device "power off"
- turn on to boot mode by hold 3 keys shown on picture below


- run i600XXGD1_REV15.exe and press start button to start upgrading



- wait till end after time counting digits (about 5min)
2) Settings to upgrade i600 do WM6

I. Downloading WM6 upgrade

- go to page:  http://www.samsungmobile.com/promotion/i600/index.jsp
- chose for example Sweden
- type serial number: i600XXGD1
- next fill registry form, with proper S/N number (remember to type it in capital letters).


 
Number could be found under battery S/N.

- download from site 3 files
Samsung modem driver http://fus.samsungmobile.com/i600/Samsung_..._modem_4.34.zip
ActiveSync 4.5 http://fus.samsungmobile.com/i600/ActiveSy...glish_setup.msi
i600UXXupdater.exe http://fus.samsungmobile.com/I600/i600UXXupdater.exe

- unpack and install Samsung modem driver (run setup exe)

- install ActiveSync 4.5, after that check if device is finding by connect to PC

II. Changing phone version to Netherlands (panateo method discovered)

- type on phone *#1546792*# (or run hidden program in WindowsAdminSettings.exe) to get to admin settings menu
- chose option "Preconfiguration"
- type password: *#81230*#
- select country: Netherlands
- select operator: Vodafone

Done, phone will reset.

III. Upgrading process

- run file i600UXXupdater.exe
- select English language


- connect i600 to PC (device must be found by ActiveSync)
- select all checkboxes and click "Verify device"

If You get message "Incorrect software version" , unplug and plug again usb cable, and click again "Verify device".
 
- after that you should se windows with information "Device id verified"

- on phone, there appear graphic information, to press and hold: "left menu" + "camera key"

- phone will restart and should run in boot mode.

If not, then turn off, and hold "power" + "right soft key" + "camera key / back key" to run boot mode


You should see updating on phone screen


On PC would be something like this

After all complete, wait (about 5 min) to load phone, and automatic preconfiguration.

Other information:
Cardwell Plugin and Piscel Viewer is present
Pda/phone/eboot version: i600uxxgg2
It has other language to chose after install from regional settings

Changes:
- faster
- new icons and look
- easier navigation and use contacts/calendar
- and many more

Other faq's:

1)What is the passoword for Internal menu in Admin settings?
Paswword: bj3open

Zna li neko kako prebaciti SPV E200 u boot mode ili fles mode?

Stisni record dugme i power dugme zajedno i ubacices ga u boot mode

Thanks. Vidio sam. Pozz