"Pokrao" ja link i objašnjenje sa jednog drugog foruma(hvala korisniku @Boto)!
Ovo je link ka download-u najnovijih drajvera(32 i 64 bit-ne verzije) za vaš bluetooth uredjaj na kompu:

http://files.filefront.com/WidcommBluetoothSoftwareDri/;5072957;;/fileinfo.html  --  (66Mb)

Novost: Bluetooth Stereo Audio podrška!




Objašnjenje registracije:

Attached is my WidcommLicensePatcher version 17.

If you use this to patch the registry directly it will now automatically patch the registry to use your selected device and set the nag dialog not to appear for the next 50 years.

If you use this to create a license.dat prior to install it will also create a license.reg which you can run after the install which will also patch the registry to prevent the nag appearing.

This works for both 32 and 64 bit versions of widcomm.

To use this program is simple. just Install widcomm and select Cancel when it says that a bluetooth device could not be found. Once the installation is completed simply run the program and select your device from the list and click save. If your device is recognised in the provided .inf files then all should now be fine. If not you will have to edit the .inf file manually."


Other user say:

"Cracking reminder
In my opinion, the best (safest) way to crack Widcomm is using the License Patcher as it will not modify any executable files (which could lead to instability)."

Uživajte u najsavršenijim drajverima za vašu "tutu"!!!

Cigla jel mogu ovo instalirat preko stare verzije widcomma bez deinstalacije?

Mislim da ćeš morati da deinstaliraš sve pa iz početka!

Onda nek stoji ova starija verzija jer radi odlično,nemam volje borit se sa SP2 i instalacijom widcomma još jedan put

reci kako si to uspeo ja ne mogu nikako da radim preko taj program jer kad prikljucim Blutut automacki mi ga prepoznaje  a program za blutut mrtav je

Kratko uputstvo za instalaciju drajvera --------------> i kako prinuditi Windows XP da koristi WIDCOMM driver sledeći sledeće korake:


Disconnect the Blueooth Dongle from the USB port

Uninstall the WIDCOM Bluetooth Software

Restart the Computer

Install the WIDCOMM Bluetooth software. When asked to plug in the Bluetooth device and click OK, don't do it. Instead, click Cancel.

After the WIDCOMM setup has finished, connect your Bluetooth device and let Windows install the driver (there should be two Bluetooth icons in the system tray; one blue-white: this is the Windows driver - and one blue-red: this is the - deactivated - WIDCOMM driver).

Open the Device Manager, right click on the "Generic Bluetooth Radio" and select "Update driver". Don't let Windows XP connect to the Internet, select "Choose software from a list or specified location".
In the next window, select "Don't search, but select the driver to install".
In the next window, activate "Show compatible hardware" (if it isn't activated already) and point to the driver on the CD driver instead of the "Generic Bluetooth Radio" driver.
Click next until the new driver is installed.
Now the WIDCOMM system tray icon should be blue-white as well, activated and ready to use.
If you now double click on "My Bluetooth Places" (e.g. on the desktop), the WIDCOMM software installation will be continued and finished.






1. Uninstall all the versions of your previous Bluetooth software.
2. Unplug your Bluetooth dongle.
3. Restart Windows.
4. Start installation (make sure your dongle is UNPLUGGED!)
5. When asked for your dongle, ignore the message and press Cancel to continue installation.
6. Restart Windows.
7. Do not plug your dongle.
8. Restart in Safe Mode.
9. Replace files. Two files to Program Files folder, two to System32 folder. If you are uncertain where to put, use search and search for the files of the same names. Thus you will see where the original files are located, by original I mean here those files, which need to be replaced by the patched ones.
10. Start Windows normally.
11. PLUG your dongle now.

Moguće je da ti SP2 na WinXP jebe drivere od Bluetootha. Odinstaliraj
Bluetooth i ponovo instaliraj prema uputstvima ispod. Kvaka je u tome da
povučeš pravi driver s instalacijskog CD-a umjesto onog kojeg su instalirali
Windowsi, i da disejblaš Windows drivere da se podignu kad resetiraš sustav.
Jednostavno je, samo slijedi upute.
******
In the Service Pack 2, Microsoft included a generic Bluetooth driver,
naturally being WHQL-certified -- it's directly from Microsoft. The WIDCOMM
Bluetooth driver however is not WHQL-certified, so windows XP continues using
the generic driver. This interferes with the WIDCOMM Bluetooth software
resulting in the above error.
You can force Windows XP to use the WIDCOMM driver by following the steps
below:
1. Disconnect the Bluetooth Dongle from the USB port
2. Uninstall the WIDCOM Bluetooth Software
3. Restart the Computer
4. Install the WIDCOMM Bluetooth software. When asked to plug in the Bluetooth
device and click OK, don't do it. Instead, click Cancel.
5. After the WIDCOMM setup has finished, connect your Bluetooth device and let
Windows install the driver. There should be two Bluetooth icons in the system
tray:
a) One blue-white: this is the Windows driver, and
b) One blue-red: this is the deactivated WIDCOMM driver
6. Open the Device Manager, right click on the "Generic Bluetooth Radio" and
select "Update driver". Don't let Windows XP connect to the Internet, select
"Choose software from a list or specified location".
7. In the next window, select "Don't search, but select the driver to
install".
8. In the next window, activate "Show compatible hardware" (if it isn't
activated already) and point to the driver on the CD driver (e.g. CSR) instead
of the "Generic Bluetooth Radio" driver.
9. Click next until the new driver is installed.
Now the WIDCOMM system tray icon should be blue-white as well, activated and
ready to use. If you now double click on "My Bluetooth Places" (e.g. on the
desktop), the WIDCOMM software installation will be continued and finished.
After doing this, you might want to consider renaming "C:\WINDOWS\INF\BTH.INF"
to something like "BTH.INF.BAK" so that the Microsoft stack doesn't get
reinstalled.

ma sve sam probao ali nece a i kako da izbrisem ovo sa crvenom on se svori automacki kad ukljucim Blutut

meni je uspjelo po ovom uputstvu koje sam stavio isto je bilo borbe a dok sam imao SP1 sve je radilo super odmah instalacija i radi.SP2 ima svoj glupi drajver za bluetooth koji se pravi pametniji od bilo kog drugog drajvera zato je potrebna ova procedura.

po ovoj slici aco koju si stavio vidi se da ti je aktivan windovsov driver a ne ovaj koji treba.sve deinstaliraj i uradi po uputstvu i mora proradit.